 |
 HSS Design Guides
In the move to promote the steel industry by promoting the use of HSS, AISC has partnered with CIDECT (International Committee for the Development and Study of Tubular Structures) to disseminate their published design guides free of charge to AISC members. These guides are published internationally and are not in accordance with AISC Specifications and are not reviewed by AISC. However, they are a great resource for any engineer looking into non-typical HSS connections and systems….just another 'tool in the toolbox' that AISC is happy to disseminate to their members.
DISCLAIMER:
The information presented in these documents was neither prepared nor reviewed by AISC. These documents are published by CIDECT (International Committee for the Development and Study of Tubular Structures) and are being made available for free to AISC members. These documents do not replace any AISC document. While the information presented in these publications is believed to be accurate, this information should not be used or relied upon for any specific application without competent professional examination and verification of its accuracy, suitability, and applicability by a licensed professional engineer, designer, or architect. Making this material available is not intended as a representation or warranty on the part of AISC, or that this information is suitable for any general or particular use or free from infringement of any patent or patents. Anyone making use of this information assumes all liability arising from such use. Caution must be exercised when relying upon other specifications and codes developed by other bodies and incorporated by reference herein since such material may be modified or amended from time to time subsequent to the printing of this edition. The authors and publishers bear no responsibility for such material other than to refer to it and incorporate it by reference at the time of the initial publication of this edition.
~
For an expanded description of the CIDECT Design Guides, visit http://www.cidect.org/en/Publications
 |
Design Guide 1
For circular hollow section (CHS) joints under predominantly static loading
Publication Date: 1995-01-01
Author: J. Wardenier, Y. Kurobane, J.A. Packer, D. Dutta, N. Yeomans
Editor: TÜV Verlag
Edition: 1st
|
 |
Design Guide 2
Structural stability of hollow sections
Publication Date: 1996-12-31
Author: J.Rondal, K.-G. Würker, D. Dutta, J. Wardenier, N. Yeomans
Editor: Verlag TÜV Rheinland
Edition: 1st
|
 |
Design Guide 3
For rectangular hollow section (RHS) joints under predominantly static loading
Publication Date: 1996-12-31
Author: J.A. Packer, J. Wardenier, Y. Kurobane, D. Dutta, N. Yeomans
Editor: TÜV Verlag
Edition: 1st
|
 |
Design Guide 4
For structural hollow section columns exposed to fire
Publication Date: 1996-12-31
Author: L. Twilt, R. Hass, W. Klingsch, M. Edwards, D. Dutta
Editor: TÜV Verlag
Edition: 1st
|
 |
Design Guide 5
For concrete filled hollow section columns under static and seismic loading
Publication Date: 1998-12-31
Author: R. Bergmann, C. Matsui, C. Meinsma, D. Dutta
Editor: TÜV Verlag
Edition: 1st
|
 |
Design Guide 6
For structural hollow sections in mechanical applications
Publication Date: 1998-12-31
Author: J. Wardenier, D. Dutta, N. Yeomans, J.A. Packer, Ö. Bucak
Editor: TÜV Verlag
Edition: 1st
|
 |
Design Guide 7
For fabrication, assembly and erection of hollow section structures
Publication Date: 1998-12-31
Author: D. Dutta, J. Wardenier, N. Yeomans, K. Sakae, Ö. Bucak, J.A. Packer
Editor: TÜV Verlag
Edition: 1st
|
 |
Design Guide 8
For CHS and RHS welded joints under fatigue loading
Publication Date: 2001-01-01
Author: Zhao, Herion, Packer, Puthli, Sedlacek, Wardenier, Weynand, van Wingerde, Yeomans
Editor: TÜV Verlag
Edition: 1st
|
 |
Design Guide 9
For structural hollow section column connections
Publication Date: 2005-01-01
Author: Y. Kurobane, J. A. Packer, J. Wardenier, N. Yeomans
Editor: TÜV Verlag
Edition: 1st
|
|
