Grade/Type/Finish combination is not allowed. Please change.
To calculate the bolt length, refer to AISC Engineering Journal paper Specifying Bolt Length for High-Strength Bolts (Carter, 2nd QTR/1996) available for download at www.aisc.org/ej
Applicable only if washer is required in Section 6 of the RCSC Bolt Specification.
Required in all cases under nut per Section 6 of the RCSC Bolt Specification.
The substitution of ASTM A194 grade 2H nuts in place of ASTM A563 grade DH nuts is permitted
Hot-dip galvanized in accordance with ASTM F2329.
Mechanical galvanized in accordance with ASTM B695.
"Zn/Al Inorganic" as used in this table refers to application of a Zn/Al Corrosion Protective Coating in accordance with ASTM F1136 which has met all the requirements of IFI-144.
Not all manufacturers are represented. For an expanded list see MSC Product Directory
The Steel Solutions Center is for people who need technical assistance, innovative solutions, or tools to make structural steel design even easier. Developed by AISC specifically for steel fabricators, structural engineers, architects, owners, developers and other professionals, the Steel Solutions Center is your number one source of information for structural steel.
Some icons by members of the The Noun Project, including Parker Martin (factor[e] design initiative), James Keuning, and Mauro Fontanari.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this software except in compliance with the License. You may obtain a copy of the License at
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.
The information presented in this app has been prepared in accordance with recognized engineering principles and is for general information only. While it is believed to be accurate, this information should not be used or relied upon for any specific application without competent professional examination and verification of its accuracy, suitability and applicability by a licensed professional engineer, designer or architect.
The publication of the material contained herein is not intended as a representation or warranty on the part of the American Institute of Steel Construction or of any other person named herein, that this information is suitable for any general or particular use or of freedom from infringement of any patent or patents. Anyone making use of this information assumes all liability arising from such use.
Caution must be exercised when relying upon other specifications and codes developed by other bodies and incorporated by reference herein since such material may be modified or amended from time to time subsequent to the release of this app. The Institute bears no responsibility for such material other than to refer to it and incorporate it by reference at the time of the initial release of this version.Agree Close