.in person seminars

Attend an AISC In-Person Seminar to discover how to get the most out of your professional development. AISC In-Person Seminars include Course Notes, Design Examples and AISC Publications to provide you with valuable tools and resources to enhance your skills.

For additional programs for architects, visit Steel Talks.  
Let AISC bring an In-Person Seminar to you! if your company or organization is interested in hosting an onsite contract seminar, email Brent Leu or call 303.668.2451.

Registration Questions? Contact us at [email protected] or call 312-670-8311
Seminar questions or comments? Visit our FAQ or contact the Continuing Education Staff at [email protected]  

Course Name Presented By PDHs


Selected Topics in Steel Design
Written by Louis F. Geschwindner, P.E., Ph.D.

Louis F. Geschwindner, P.E. Ph.D. 6.0









Seminar Information
Description

This course focuses on Chapters E, F, and H of AISC 360-10 Specification for Structural Steel Buildings, June 22, 2010, addressing single angle flexural members, beams with torsion, column base plate design and symmetric, singly symmetric and unsymmetric compression members. Single angle flexural members will be considered with a variety of lateral-torsional bracing conditions. Bending about the geometric and principal axes and biaxial bending will be addressed. Flexural members that must also carry torsional moments will be covered. These include single angles, zees, I-shapes loaded in torsion, and HSS loaded in torsion. Base plates that are required to carry compression, tension and bending will be presented. The seminar will also address single and double angle and single and double WT compression members.

Handouts All attendees will receive copy of presentation slides.
PDH Attendees will receive 6.0 PDHs for this session. This session is approved by AIA. AISC is an approved provider in New York (#5) and Florida (#0003884). PDH Certificates verifying an individual's attendance to each seminar will be e-mailed to each attendee 48 hours after the completion of the seminar.
Agenda 7:30 a.m. Registration and morning pastries
8:00 a.m. Seminar Begins
12:00 p.m. Lunch (provided)
3:00 p.m. Seminar Concludes
Contact To sponsor a seminar: email Lou Gurthet or call 231.228.2274
To bring this seminar in-house: email Brent Leu or call 303.668.2451
Registration questions, email [email protected] or call 312-670-8311
Venue

Pagoda Hotel
1525 Rycroft St.
Honolulu, HI 96814

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Register

Date Speaker Venue City
Registration October 26, 2016 Louis F. Geschwindner

Pagoda Hotel
1525 Rycroft St.
Honolulu, HI

Honolulu, HI

Sponsored by the Steel Industry Improvement Fund of Hawaii

Fees & Registration
CASE, NCSEA, SEI, and AIA members receive the AISC Member discount.
  Single Bring A Buddy  
  AISC
Member
Non
Member
Educator/
Student
Single registrant and Buddy
must both be members
 
Seminar - Honolulu ONLY $100 $100 $100 N.A.  

Author and Speaker
Louis F. Geschwindner is a former Vice President of Engineering and Research at AISC and Professor Emeritus of Architectural Engineering at Penn State University. He received his Bachelor's degree in building science from Rensselaer Polytechnic Institute and both his Master of Science in architectural engineering and his Ph.D. in civil engineering from Penn State. He is a Registered Professional Engineer and taught at Penn State for more than 40 years. Professor Geschwindner is a past chairman of the Committee on Design of Steel Building Structures of the Structural Engineering Institute of the American Society of Civil Engineers (SEI/ASCE) and is a member of the AISC Committee on Specifications. Chairing its Member Design technical committee. Dr. Geschwindner has been an author and presenter in many of the American Institute of Steel Construction lecture series. Geschwindner 2014