.webinar






The below 1-1.5 hour webinars are free to view. If you would like to receive a CEU/PDH certificate, you must purchase and pass a quiz on the corresponding webinar. 

Course Name Presented by CEUs/PDHs Release Date
FREE PDH! Are You Properly Specifying Materials? Charlie Carter, Ph.D., S.E., AISC 0.10/1.0 June 2016
Metallizing - From A to Zinc Brian Raff and Tony Matutis 0.10/1.0 May 2016
Practical Implementation of Composite Floor Designs William P. Jacobs V, P.E., S.E. 0.15/1.5 April 2016
Weld Details: The Good, The Bad, and The Ugly Duane Miller, Sc.D., P.E. 0.15/1.5 April 2016
FREE PDH! The History of the AISC Specification for Steel Buildings, 1923-2010 Ted Galambos, Ph.D., P.E. 0.10/1.0 April 2016
Understanding the Code of Standard Practice David I. Ruby, P.E., S.E., F.ASCE, SECB and Glenn Bishop, P.E., SECB, F.ASCE 0.15/1.5 March 2016
Sustainability 2015: What’s New with Steel and Sustainability John Cross 0.10/1.0 March 2016
Weld Inspection: What Matters and What Doesn't Duane K. Miller, Sc.D., P.E. 0.15/1.5 January 2016
Structural Fire Engineering Allan Jowsey, Ph.D. 0.15/1.5 December 2015
FREE PDH! Architecturally Exposed Terri Meyer Boake, B.E.S., B.Arch., M.Arch., LEED AP 0.10/1.0 October 2015
Effective Communication of Connection Design Patrick Fortney, Ph.D., P.E. 0.15/1.5 October 2015
Designing Members for Torsion Dan Linzell, Ph.D., P.E., F.ASCE 0.15/1.5 October 2015
FREE PDH! SteelDay 2015: Steel and the Phantasmagoria Charlie Carter, Ph.D., S.E., AISC 0.10/1.0 October 2015
Alternate Methods of Connection Design     Patrick McManus, Ph.D., P.E., S.E. and Larry Muir, P.E. 0.15/1.5 September 2015
Modules for Learning Structural Stability    Ronald Ziemian, P.E., Ph.D. 0.15/1.5 July 2015
Seismology and Earthquake Effects Rafael Sabelli, S.E. 0.15/1.5 June 2015
Vertical Bracing Connections - Analysis and Design William A. Thornton, P.E.  and Larry Muir, P.E. 0.10/1.0 June 2015
Where Did That Force Come From? Combining Diaphragm Braced Frame Forces Rafael Sabelli, S.E. 0.15/1.5 February 2015
Seismic Load Paths for Steel Buildings Rafael Sabelli, S.E. 0.15/1.5 February 2015

Load Paths! The Most Common Source of Engineering Errors

    
Carol Drucker, S.E., P.E., SECB 0.15/1.5 December 2014

FREE CEU/PDH! SteelDay 2014: Resilient - You Can't Even Spell It Without Steel
Charlie Carter, Ph.D, S.E., P.E. 0.10/1.0 September 2014
FREE CEU/PDH! SteelDay 2014: Innovations in Steel     Tabitha Stine, S.E., P.E., LEED AP 0.10/1.0 September 2014

Fastener Fundamentals
Chad Larson 0.15/1.5 June 2014

Column Base Connections
Amit Kanvinde, Ph.D. 0.15/1.5 June 2014

Design of Reinforcement for Steel Members Part 2
Bo Dowswell, Ph.D., P.E. 0.15/1.5 May 2014

Design of Reinforcement for Steel Member Part 1
Bo Dowswell, Ph.D., P.E. 0.15/1.5 January 2014
FREE CEUs/PDHs! SteelDay 2013: The Life of the K Factor Charlie Carter, Ph.D., S.E., AISC 0.10/1.0 October 2013
Erection Engineering: The Science Behind the Art Clinton O. Rex, Ph.D., and William P. Jacobs, V, P.E., S.E., Stanley D. Lindsey & Associates 0.15/1.5 September 2013

FREE CEUs/PDHs! SteelDay 2012: 50 Tips for Designing Constructable Steel Buildings
Clifford Schwinger, P.E., The Harman Group, Inc. 0.15/1.5 October 2012

New Composite Design Provisions
William P. Jacobs, V, P.E., S.E., Stanley D. Lindsey & Associates 0.15/1.5 August 2012

Five Useful Stability Concepts      
Joseph Yura, Ph.D., University of Texas at Austin  0.15/1.5 August 2012 

Practical Steel Metallurgy  
Doug Rees-Evans, Steel Dynamics, Inc.  0.15/1.5  August 2012
Design for Stability      Louis F. Geschwindner, P.E., Ph.D., Professor Emeritus, Penn State University   0.15/1.5   August 2012


High Strength Bolts  

Geoff Kulak, Ph.D., Professor Emeritus, University of Alberta   0.15/1.5   August 2012

Facade Attachments for Steel Framed Buildings  
Alec S. Zimmer, P.E., SECB, LEED AP, Simpson, Gumpertz & Heger, Inc.  0.15/1.5   August 2012

Welding-Special Applications
 
Duane K. Miller, Sc.,D., P.E.    0.15/1.5  August 2012
Staggered Truss System: Lessons Learned
John Kennedy,  Structural Affiliates International; Jon Beier, Shelley Metz Baumann Hawk
0.10/1.0 August 2012


Connection Design: Dealing with Load Path, Transfer Forces and Apparent Lack of Joint Equilibrium 

Bill Merrell, Consulting Engineer. 0.15/1.5 August 2012

Connections: The Last Bastion of Rational Design
Bill Thornton, Cives Corporation. 0.10/1.0 August 2012

Unified Design of Steel I-Section Flexural Members in the 2005 AISC and 2007 AASHTO Specifications
Donald W. White, Georgia Tech. 0.15/1.5 May 2012



The AISC Seismic Provisions: Past, Present, and Future

James O. Malley, P.E., S.E., Senior Principal at Degenkolb Engineers
in San Francisco and Chair of AISC TC 9 on Seismic Design. 
 0.15/1.5  April 2011

Performance and Behavior of Gusset Plate Connections

 
Charles Roeder, Ph.D., University of Washington;
Larry Muir, P.E., consultant

0.15/1.5 April 2011


Why Can't Bolting be Simpler-Like it used to be?


Peter Birkemoe, University of Toronto

0.10/1.0 April 2011

Design of Frames Using Web-Tapered Members


Richard Kaehler, Computerized Structural Design;
Donald White and Yoon Duk Kim of Georgia Institute of Technology

0.10/1.0 April 2011


Ethics and Accountability


Dan Murphy, Meyer Borgman & Johnson, Inc.

0.15/1.5 February 2011


Safety by Design


T. Michael Toole, Bucknell University

0.10/1.0 February 2011


Underlying Concepts to the Seismic Provisions


Chia-Ming Uang, Ph.D., University of California, San Diego

0.15/1.5 December 2010


Specifying Camber: Rules of Thumb for Designers


Erika Winters-Downey, S.E., AISC

0.10/1.0 December 2010


Design with Damping


Robert McNamara, McNamara/Sylvia Consulting Engineers

0.10/1.0 September 2010


SSPC Surface Preparation - Shop Painting of Structural Steel


Andrew Smith, International Paints; Bill Shroup, SSPC;
and Todd Alwood, AISC

0.15/1.5 September 2010


Around the Bend - What You Need to Know about Steel Bending


Barry Feldman, Kottler Metal 

0.10/1.0  September 2010


Structural Integrity of Buildings


Ronald Hamburger, Simpson Gumpertz & Heger;
Kurt Gustafson, AISC

0.15/1.5 September 2010


**All courses are FREE to view. If you would like CEUs/PDHs, purchase, take and pass a quiz
 to receive a certificate.**

Course Name Presented by CEUs/PDHs Release Date


Partially Restrained and Flexible Moment Connections



Louis F. Geschwindner, Ph.D., Vice President of Special Projects
for AISC and Professor Emeritus, Penn State University

0.15/1.5 June 2009


Got Stiffness? Designing Better Base Plates


Barry Arnold, ARW Engineers

0.10/1.0 June 2009


Seismic Design of Ductile Special Concentrically Braced Frames


Constantin Christopoulos and Jefferey Packer, University of Toronto

0.15/1.5 June 2009


Joist and Joist Girders as Lateral Load Resisting Frames

James Fisher, Computerized Structural Design

0.10/1.0 June 2009

Robust Structures


Christopher Foley, Marquette University
Kirk Marchand, Protection Engineering Consultants

0.15/1.5 June 2009


Rules of Thumb for Steel Design


Socrates Ioannides, Structural Affliliates International

0.10/1.0 April 2009


**All courses are FREE to view. If you would like CEUs/PDHs, purchase, take and pass a quiz
 to receive a certificate.**

Course Name Presented by CEUs/PDHs Release Date


Non-Destructive Examination and Special Inspection of Seismic Welding


Mike Mayes, Mayes Testing Engineers

0.10/1.0
April 2009

Composite Steel Joists - Standards and Code of Standard Practice


David Samuelson, Nucor Research and Development
Perry Green, Steel Joist Institute

0.10/1.0
April 2009


Quality Assurance for Structural Engineering Firms


Cliff Schwinger, Cagley Harman & Associates

0.10/1.0
April 2009

Development and Large Scale Testing of Long Span Floor Systems 


Devin Huber, Purdue University
Erika Winters-Downey, AISC

0.10/1.0
April 2009


Green Design: Going Beyond Material Issues


Mark Gorgolewski, Ryerson University

0.10/1.0
April 2009


Cool Castings and Green Ideas from Europe


Alain Nussbaumer, Swiss Federal Institute of Technology

0.10/1.0
April 2009


Basic Concepts in Ductile Detailing of Steel Structures


Michael D. Engelhardt, P.E., Ph.D., University of Texas at Austin

0.15/1.5
April 2008


Seismic Design and Behavior of Composite RCS Frames


Gregory Deirelein, P.E., Ph.D., Stanford University

0.10/1.0
March 2008


A New Approach to Design for Stability


R. Shankar Nair, S.E., P.E., Ph.D., Teng & Associates

0.10/1.0
February 2008


Basic Introduction to Nonlinear Analysis


Ronald Ziemian, P.E., Ph.D., Bucknell University

0.15/1.5
January 2008


Fatigue and Fracture Control in Steel Structures


Stanley Rolfe, P.E., Ph.D., University of Kansas

0.15/1.5
November 2007


Introduction to the Shakedown Behavior of Steel-Framed Structures


Theodore Galambos, Ph.D., P.E.

0.10/1.0 October 2007