Research
Research Library
The following is a list of all research projects AISC is involved in. Click on the title of each column to sort it and click on any title to learn more about that project.
* denotes a Milek Fellowship Award project
Report Title | Primary Investigator(s) | Institution | Year | AISC Report No. |
---|---|---|---|---|
Shear Transfer in Exposed Column Base Plates Phase I | Amit Kavinde and Gregory Deierlein | University of California, Davis and Stanford University | 2009 | 3278 |
Seismic Strength of Moment End-Plate Connections with Attached Concrete Slab | Thomas Murray | Virginia Tech | 2009 | 3279 |
Tension Capacity of Bolted Single Angle Shear Connection | W.M. Kim Roddis | The George Washington University | 2010 | 3267 |
Performance-Based Plastic Design of Earthquake Resistant Concentrically Braced Steel Frames | Subhash Goel | University of Michigan | 2010 | 3281 |
Towards Systems Behavior Factors for Composite Frames: Experimental and Analytical Studies | Jerome Hajjar and Roberto Leon | University of Illinois at Urbana-Champaign and Georgia Tech | 2011 | 3282 |
Economic and Serviceable Seismic Systems Phase II - All-Bolted Buckling Restrained Braced Frames | Patrick McManus and Jay Puckett | Martin/Martin Inc. and University of Wyoming | 2011 | 3283 |
Modeling Reserve System Performance for Low-Ductility Braced Frames | Eric Hines | Tufts University | 2012 | -- |
Hybrid Steel Frames | Finley Charney | Virginia Tech | 2013 | -- |
Three-Dimensional Finite Element Simulation of the Seismic Behavior of Multitier Concentrically Braced Frames | C.D. Stoakes, L.A. Fahnestock | University of Iowa, University of Illinois | 2014 | -- |
Cyclic Inelastic Behavior of Concrete Filled Sandwich Panel Walls Subjected to In-Plane Flexure | Michel Bruneau | University at Buffalo | 2014 | -- |
Weld Design for Rectangular HSS Overlapped K- Connections | Jeffrey Packer | University of Toronto | 2014 | -- |
Slip Coefficients for Galvanized Surfaces | Sean Donahue, Todd Helwig, Joseph Yura | The University of Texas at Austin | 2014 | -- |
Framing Strategies for Robustness in Steel Buildings | Gustavio Cortes, Judy Liu | LeTourneau University, Purdue University | 2015 | -- |
Tensile Strength of Embedded Anchor Groups: Tests and Strength Models | David Grilli, Amit Kanvinde | University of California, Davis | 2015 | -- |
Evaluation of the Effect of Boat-Shaped Welds and Pneumatic Power Actuated Fasteners on the Seismic Behavior of Moment Frames | Matthew Eatherton | Virginia Polytechnic Institute and State University | 2015 | -- |
Thermo-Mechanical Modeling and Testing of Thermal Breaks in Structural Steel Point Transmittances | Scott Hamel | University of Alaska-Anchorage | 2016 | -- |
Deconstructable Systems for Sustainable Design of Steel and Composite Structures | Lizhong Wang, Lucas N. Troup, Kyle Coleman, Mathhew J. Eckelman, Jerry Hajjar, Clayton Brown, and Mark D. Webster | Northeastern University | 2016 | -- |
Experimental Verification of a Procedure for SMF Continuity Plate Weld Design | Chia-Ming Uang | University of California, San Diego | 2017 | -- |
Thermal Break Strategies for Cladding Systems in Building Structures | Jerome F. Hajjar | Northeastern University | 2017 | -- |
Design Development for Steel Strongback Braced Frames to Mitigate Concentrations of Damage | Barbara Simpson | University of California, Berkeley | 2018 | -- |
* Damage Resistant Design Methodology for Multi-Hazard Resilient Buildings | Michael Pollino, Derek Slovenec, Laura Rendos, Gwen Evans | Case Western Reserve University | 2019 | -- |
R-Factors for Coupled Composite Plate Shear Walls / Concrete Filled (CC-PSW/CF) | Michel Bruneau, Amit Varma, Emre Kizilarslan, Morgan Broberg, Soheil Shafaei, Jungil Seo | Purdue University and the University at Buffalo | 2019 | CPF#05-17 |
Ad Hoc Task Group Report on High Strength Steel | Ben Schafer | AISC Committee on Specifications Task Group on High Strength Steel | 2019 | -- |
Structural Adhesives Workshop | Devin Huber and Chris Garrell | AISC | 2019 | -- |
SpeedCore Summit | Devin Huber and Jennifer Traut-Todaro | AISC | 2019 | -- |
Analysis and Design of Eccentric Stiffeners Part of Moment Connections to Column Flanges | Keith J. Kowalkowski and Javier Alvarez Rodilla | Lawrence Tech | 2019 | -- |
Investigation into Shear Stud Fatigue Demands | Gary S. Prinz | University of Arkansas | 2019 | -- |
Alternative Weld Details and Design for Continuity Plates and Doubler Plates for Applications in Special and Intermediate Moment Frames | Mathew Reynolds Chia-Ming Uang | University of California, San Diego | 2020 | -- |
Seismic Design Coefficients for SpeedCore or Composite Plate Shear Walls - Concrete Filled (C-PSW/CF) | Shubham Agrawal, Morgen Broberg, Amit H. Varma | Purdue University | 2020 | -- |
Structural Fire Engineering and Design of Filled Composite Plate Shear Walls (SpeedCore) | Ataollah Taghipour Anvari, Saahastaranshu Bhardwaj, Preshit Wazalwa, Amit Varma | Purdue University | 2020 | -- |
Ad Hoc Task Group Report on Local Buckling (Width-to-thickness) Limits | Ben Schafer | AISC Committee on Specifications Task Group on Local Buckling (Width-to-thickness) Limits | 2020 | -- |
Pull-Through Testing of Plate Washers for Column Anchor Rod Applications | Paul A. Cozzens, Gian Andrea Rassati, James A. Swanson | University of Cincinnati | 2021 | -- |
Understanding the Behavior of Steel Connections with Bolts and Welds in Combination | Mohamed Soliman, Bruce Russell, Christopher Waite, Ligang Shen, Ethan Stringer | Oklahoma State University | 2021 | -- |
* Thin Composite Two-Way Flooring System for Steel Structural Systems | Eugene Boadi-Danquah, Duncan MacLachlan, Brian Robertson, Tristan Yount, Matthew Fadden, and William Collins | University of Kansas | 2021 | -- |
Investigation of Bearing and Tearout of Steel Bolted Connections | Mark D. Denavit, Nicolo Franceschetti, Andrew Shahan | University of Tennessee, Knoxville | 2021 | -- |
Fillet and PJP Welds | Bo Dowswell, Clayton Cox, Mohamed S. Gallow, and Fouad H. Fouad | ARC International, LLC | 2021 | -- |
Durability of Steel Bridge Corrosion Protection Systems Using Environment-Based Accelerated Corrosion Testing | PI: Jennifer McConnell | Co-PI: Clara Chan | Research Assistants: Julie Giannino and Nate Young | Other Contributors: Sally Saleem and Tian Bai | University of Delaware | 2021 | -- |