AISC


Columns

Course Name PDH Date Author/Speaker Type
Column Design: Past, Present, Future 1.5 Dec-18 Joseph A. Yura, PE, PhD Webinar
Design of Column Reinforcement [L2] 1 Apr-19 Bo Dowswell, PE, PhD NASCC
Accurate Direct Strength Method (DSM) Prediction of Column Flexural-Torsional Failure Loads 0 Apr-19 Pedro B. Dinis, Dinar Camotim and Andre D. Martins; Universidade de Lisboa; Lisbon, Portugal; Alexandre Landesmann; Federal University of Rio de Janeiro; Rio de Janeiro, Brazil SSRC
Comparison of Steady-State and Transient Thermo-Mechanical Responses of Unprotected Aluminum Columns at Elevated Temperatures 0 Apr-19 Jean C. Batista Abreu and Tyler D. Spinello; Elizabethtown College; Elizabethtown, PA; Nicholas A. Soares and Ronald D. Ziemian; Bucknell University; Lewisburg, PA SSRC
Compression Capacity of Short Cold-Formed Steel Built-Up Columns with Double-Lacing Configuration and Low Sectional Compactness 0 Apr-19 M. Adil Dar, Dipti Ranjan Sahoo and Arvind K. Jain; Indian Institute of Technology Delhi; New Delhi, India SSRC
Design of Fixed-Base Hollow Structural Section Columns Subjected to Large Seismic Drift 0 Apr-19 Hye-eun Kong and Matthew R. Eatherton; Virginia Polytechnic Institute and State University; Blacksburg, VA; Benjamin W. Schafer; Johns Hopkins University; Baltimore, MD SSRC
Flexural-Torsional Deformations of Imperfect Thin-Walled Columns with Continuous Bracing 0 Apr-19 Raymond H. Plaut; Virginia Tech; Blacksburg, VA; Cristopher D. Moen; NBM Technologies, Inc.; Blacksburg, VA SSRC
Post-Buckling Behavior of Thin-Walled Regular Polygonal Tubular Columns Undergoing Local-Distortional Interaction 0 Apr-19 Andre D. Martins and Dinar Camotim; Universidade de Lisboa; Lisbon, Portugal; Rodrigo Goncalves; Universidade Nova de Lisboa; Lisbon, Portugal SSRC
Spherically-Hinged Cold-Formed Steel Equal-Leg Angle Columns: Experimental Investigation and DSM Design 0 Apr-19 Kathleen Guimaraes Santana and Alexandre Landesmann; Universidade Federal do Rio de Janeiro; Rio de Janeiro, Brazil; Dinar Camotim and Pedro Borges Dinis; Universidade de Lisboa; Lisbon, Portugal SSRC
Stability of Columns [S11] 0 Apr-19   NASCC
The Strength of Rotary-Straightened Steel Columns 0 Apr-19 Xiaomeng Ge and Joseph A. Yura; University of Texas at Austin; Austin, TX SSRC
Advances in the Direct Strength Method [S9] 0 Apr-18 Alexandre Landesmann, DSc; Michael Seek, PhD, PE NASCC
Column Design: Past, Present, Future 0 Apr-18 Joseph A. Yura; University of Texas at Austin; Austin, TX SSRC
Column Design: Past, Present, Future [N34] 0 Apr-18 Joseph Yura, PE, PhD NASCC
On the Accuracy of the Current Direct Strength Method (DSM) Design Curve for Columns Failing in Global Modes 0 Apr-18 Pedro B. Dinis, Dinar Camotim, and Andr‚ D. Martins; Universidade de Lisboa; Lisbon, Portugal SSRC
Analysis of Rectangular CFT Columns Subjected to Elevated Temperature 0 Mar-17 Zhichao Lai and Amit H. Varma, Purdue University, West Lafayette, IN; Anil Agarwal, Indian Institute of Technology Hyderabad, Telangana, India SSRC
Design Methods for Columns with Intermediate Elastic Torsional Restraint 0 Mar-17 Hannah B. Blum and Kim J.R. Rasmussen, University of Sydney, Sydney, NSW, Australia SSRC
Spherically-Hinged Short-to-Intermediate Angle Columns Stability, Non-Linear Behavior and DSM Design 0 Mar-17 Pedro B. Dinis and Dinar Camotim, University of Lisbon, Lisbon, Portugal SSRC
Stability Analysis of Steel Columns under Cascading-Hazard of Earthquake and Fire 0 Mar-17 Mehrdad Memari and Hussam Mahmoud, Colorado State University, Fort Collins, CO SSRC
Stability of Columns [S7] 0 Mar-17   NASCC
Stability of Slender Section HSS Columns 0 Mar-17 Liya Li, Chang’an Univeristy, Xi’an, China; Lucile Gérard and Nicolas Boissonnade, Laval University, Québec, Canada; Marielle Hayeck, University of Applied Sciences of Western Switzerland - Fribourg, Switzerland SSRC
The Effects of Accurate Boundary Condition Modeling on Column Stability 0 Mar-17 Cliff D. Bishop and Patxi Uriz, Exponent Inc., Menlo Park, CA SSRC
Analysis and Design of Noncompact and Slender Rectangular CFT Columns Subjected to Ambient and Elevated Temperature 0 Apr-16 Zhichao Lai and Amit H. Varma, Purdue University, West Lafayette, IN; Hua Yang, Harbin Institute of Technology, Harbin, China; Anil Agarwal, Indian Institute of Technology Hyderabad, Telangana, India SSRC
Axial Stability of Columns Composed of Combined Sigma CFS 0 Apr-16 Mohamed El Aghoury, Ain Shams University, Cairo, Egypt; Maged T. Hanna, Housing and Building National Research Center, Giza, Egypt; Essam A. Amoush, Higher Technological Institute, Tenth of Ramadan City, Egypt SSRC
Buckling and Design of Columns with Intermediate Elastic Torsional Restraint 0 Apr-16 Hannah B. Blum and Kim J.R. Rasmussen, University of Sydney, Sydney, Australia SSRC
Dynamic Stability of Deep and Slender Wide-Flange Steel Columns - Full Scale Experiments 0 Apr-16 Ahmed Elkady and Dimitrios G. Lignos, McGill University, Montreal, QC, Canada SSRC
Experimental Examination of Creep Buckling of Steel Columns in Fire 0 Apr-16 Mohammed A. Morovat, Michael D. Engelhardt, Todd A. Helwig and Eric M. Taleff, University of Texas at Austin, Austin, TX SSRC
Experimental Studies on the Composite Action in Wood-Sheathed and Screw-Fastened Built-Up Cold-Formed Steel Columns 0 Apr-16 David C. Fratamico, Shahabeddin Torabian and Benjamin W. Schafer, John Hopkins University, Baltimore, MD; Kim J. R. Rasmussen, University of Sydney, Sydney, Australia SSRC
Experimental Studies on the Composite Action in Wood-Sheathed and Screw-Fastened Built-Up Cold-Formed Steel Columns 0 Apr-16 David C. Fratamico, Shahabeddin Torabian, and Benjamin W. Schafer; Johns Hopkins University; Baltimore, MD; Kim J. R. Rasmussen; University of Sydney; Sydney, Australia SSRC
Full Field Cold-Formed Steel Column Buckling Measurements with High Resolution Image-Based Reconstruction 0 Apr-16 Abraham Lama Salomon and Christopher D. Moen, Virginia Polytechnic Institute and State University, Blacksburg, VA; Dave Fratamico and Benjamin W. Schafer, John Hopkins University, Baltimore, MD SSRC
Full field cold-formed steel column buckling measurements with high resolution image-based reconstruction 0 Apr-16 A. Lama Salomon and C.D. Moen; Virginia Tech; Blacksburg, VA; D. Fratamico and B.W. Schafer; Johns Hopkins University; Baltimore, MD To enable screen reader support, press Ctrl+Alt+Z To learn about keyboard shortcuts, press Ctrl+slash SSRC
Local-Distortional-Global Interaction in Cold-Formed Steel Lipped Channel Columns: Behavior, Strength and DSM Design 0 Apr-16 Pedro B. Dinis and Dinar Camotim, Technical University of Lisbon, Lisbon, Portugal; Ben Young, The University of Hong Kong, Hong Kong, China SSRC
Short-to-Intermediate Slender Pin-Ended Cold-Formed Steel Equal-Leg Angle Columns: Experimental Investigation and DSM Design 0 Apr-16 Alexandre Landesmann and Renato Cruz, Federal University of Rio de Janeiro, Brazil; Dinar Camotim and Pedro B. Dinis, Technical University of Lisbon, Lisbon, Portugal SSRC
Stability Design of Columns with Intermediate Gravity Loads 0 Apr-16 Lip H. Teh, University of Wollongong, Wollongong, Australia; Benoit P. Gilbert, Griffith University, Gold Coast, Australia SSRC