Publications
In This Section
Included Standards
The following ASTM standards are included in this collection.
| A0006 | Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling |
| A0036 | Specification for Carbon Structural Steel |
| A0053 | Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless |
| A0123 | Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products |
| A0143 | Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement |
| A0182 | Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
| A0193 | Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications |
| A0194 | Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both |
| A0216 | Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service |
| A0240 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| A0276 | Standard Specification for Stainless Steel Bars and Shapes |
| A0283 | Specification for Low and Intermediate Tensile Strength Carbon Steel Plates |
| A0307 | Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60000 PSI Tensile Strength |
| A0312 | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
| A0320 | Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service |
| A0351 | Standard Specification for Castings, Austenitic, for Pressure Containing Parts |
| A0354 | Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners |
| A0370 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| A0380 | Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems |
| A0384 | Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies |
| A0385 | Practice for Providing High-Quality Zinc Coatings (Hot-Dip) |
| A0435 | Specification for Straight-Beam Ultrasonic Examination of Steel Plates |
| A0449 | Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use |
| A0453 | Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels |
| A0473 | Standard Specification for Stainless Steel Forgings |
| A0479 | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
| A0480 | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| A0484 | Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings |
| A0500 | Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes |
| A0501 | Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing |
| A0502 | Standard Specification for Rivets, Steel, Structural |
| A0514 | Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding |
| A0529 | Specification for High-Strength Carbon-Manganese Steel of Structural Quality |
| A0554 | Standard Specification for Welded Stainless Steel Mechanical Tubing |
| A0563 | Specification for Carbon and Alloy Steel Nuts |
| A0563M | Specification for Carbon and Alloy Steel Nuts (Metric) |
| A0564 | Standard Specification for Hot-Rolled and Cold- Finished Age-Hardening Stainless Steel Bars and Shapes |
| A0568 | Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for |
| A0572 | Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel |
| A0588 | Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance |
| A0606 | Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance |
| A0618 | Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing |
| A0666 | Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar |
| A0668 | Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use |
| A0673 | Specification for Sampling Procedure for Impact Testing of Structural Steel |
| A0693 | Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| A0705 | Standard Specification for Age-Hardening Stainless steel Forgings |
| A0706 | Standard Specification forDeformed and Plain Low-Alloy Steel Bars for Concrete Reinforceent |
| A0709 | Specification for Structural Steel for Bridges |
| A0747 | Standard Specification for Steel Castings, Stainless, Precipitation Hardening |
| A0751 | Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products |
| A0759 | Specification for Carbon Steel Crane Rails |
| A0770 | Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications |
| A0780 | Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings |
| A0786 | Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates |
| A0790 | Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe |
| A0847 | Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance |
| A0890 | Standard Specification for Castings, Iron Chromium Nickel Molybdenum Corrosion Resistant, Duplex (Austenitic/Ferritic), for General Application |
| A0913 | Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST) |
| A0941 | Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys |
| A0958 | Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades |
| A0962 | Standard Specification for Common Requirements for Bolting Intended for Use at any Temperature from Cryogenic to the Creep Range |
| A0967 | Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts |
| A0992 | Specification for Structural Steel Shapes |
| A0999 | Standard Specification for General Requirements of Alloy and Stainless Steel Pipe |
| A1008 | Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable |
| A1011 | Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength |
| A1018 | Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength |
| A1043 | Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings |
| A1049 | Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components |
| A1065 | Specification for Cold-Formed Electric-Fusion (Arc) Welded High-Strength Low-Alloy Structural Tubing in Shapes, with 50 ksi [345 MPa] Minimum Yield Point |
| A1066 | Specification for High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-Mechanical Controlled Process (TMCP) |
| A1069 | Standard Specification for Laser and Laser Hybrid Welded Stainless Steel Bars, Plates, and Shapes |
| A1082 | Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications |
| A1085 | Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS) |
| B0695 | Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel |
| C567 | Standard Test Method for Determining Density of Structural Lightweight Concrete |
| D4417 | Standard Test Methods for Field Meaurement of Surface Profile of Blast Cleaned Steel |
| D7127 | Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument |
| E0119 | Standard Test Methods for Fire Tests of Building Construction and Materials |
| E0165 | Standard Practice for Liquid Penetrant Examination for General Industry |
| E0709 | Standard guide for Magnetic Particle Examination |
| F0436 | Specification for Hardened Steel Washers Inch and Metric Dimensions |
| F0593 | Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs |
| F0594 | Standard Specification for Stainless Steel Nuts |
| F0606 | Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets |
| F0788 | Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series |
| F0836M | Standard Specification for Style 1 Stainless Steel Metric Nuts |
| F0844 | Specification for Washers, Steel, Plain (Flat), Unhardened for General Use |
| F0959 | Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners, Inch and Metric Series |
| F1470 | Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection |
| F1554 | Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength |
| F2329 | Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners |
| F3043 | Specification for Twist Off Type Tension Control Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength |
| F3111 | Specification for Heavy Hex Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength |
| F3125 | Specification for High Strength Structural Bolts, Steel and Alloy Steel, Heat Treated, 120 ksi (830 MPa) and 150 ksi (1040 MPa) Minimum Tensile Strength, Inch and Metric Dimensions |
| F3148 | Standard Specification for High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144 ksi Minimum Tensile Strength, Inch Dimensions |
| G0101 | Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels |