AISC
2023 SSRC Proceedings
- A GBT-based finite element for the buckling analysis of thin-walled members with circular axis
- An updated analytical method for predicting the bracing behavior of Z-purlin supported standing seam diaphragm systems
- Analytical prediction of the axial capacity of concrete-filled cold-formed steel (CF-CFS) built-up columns
- Beedle Lecture 2032: Composite Construction - Past and Future
- Behavior, strength and DSM-based design of cold-formed steel pin-ended columns buckling in flexural-torsional modes
- BENCHMARK PROBLEMS WITH FLEXURAL-TORSIONAL COUPLING FOR DIRECT ANALYSIS METHOD IN ANSI/AISC 360-16
- Brace Stiffness Quantification for Lean-on Bracing
- Buckling Mode Decomposition of Built-up Members via Modal Finite Strip Method (m-FSM)
- Buckling strength sensitivity for thin-walled tubes with complex imperfections
- Cold-formed steel strength predictions for combined bending and torsion
- Composite timber veneer-wrapped steel columns -- proof of concept through tests and numerical simulations
- Computationally efficient buckling analysis of wind turbine towers
- Cross-section stability of hot-rolled and welded I-shapes under combined loading
- Data-driven buckling capacity prediction of normal- and high-strength steel hollow structural section columns
- Design of steel beams affected by local/global coupled instabilities
- DSM Design of CFS Lipped Channel Columns undergoing Distortional-Global Interaction at Elevated Temperatures
- Effect of strain hardening on the limit slenderness for semi-compact sections
- Efficient stability and vibration analysis of an all steel modular floor assembly
- Experimental and numerical investigation of the impact of non-uniform end bearing conditions on the axial capacity of global height, unsheathed, cold-formed steel wall assemblies
- Experimental and Numerical Investigations on Floor-To-SpeedCore Wall Connections Under Fire Loading
- Experimental investigation of buckling of thin-walled cylindrical shells subjected to combined bending and torsion
- Experimental investigation on local stability enhancement of steel tubular profile introducing hybrid metal-polymer sections
- Finite element analysis of web crippling behavior of cold-formed steel members: modeling recommendations based on a review of best practices
- Flexural behaviour of wire arc additively manufactured tubular sections
- Frame Design Using Nonprismatic Members -- Satisfying the Need for Speed
- Interactive failure mode and Design of Cold-formed Steel Closed Cross-section Built-up Columns
- Local and lateral torsional buckling of 36 in. deep beams with IMF end-plate moment connections
- Local buckling and design of aluminum I-shapes
- Measurement of Weld Depressions in Thin-walled Steel Tubes before and after Circumferential Welding
- Modeling partially yielded regions of W-Shapes using a second-order stiffness reduction over the element length
- Modeling Temperature-induced Instabilities for Tracing the Fire-induced Progressive Collapse in Steel-Framed Buildings
- Prediction of the deformation and local buckling behavior of structural systems using the deep neural network direct stiffness method (DNN-DSM)
- Probing the buckling of axially compressed thin stiffened cylindrical shells: Stability landscape and nondestructive prediction
- Progression of failure in cold-formed steel diaphragms sheathed with steel deck
- Proportioning energy-dissipating members in strongback braced frames
- Rayleigh Ritz formulation for moment modification factors on lateral torsional buckling
- Refined Design Expression for the In-Plane Girder Stiffness of Torsional Beam Bracing Systems
- Response and Strength of Intermediately Stiffened Cold-Formed Steel Lipped Channel Columns Formed from 100 ksi (690 MPa) Steel
- Seasonal analysis of a 846 long steel box girder bridge using Terrestrial Laser Scanners (TLS) and FE-models
- Sectional Buckling Tests of Built-up Cold-Formed Steel Columns
- Seismic Performance of Cold-Formed Steel Framed Shear Walls using In-Frame Corrugated Steel Sheathing
- Shear buckling coefficients for longitudinally stiffened-haunched steel plate girders
- Stability and design of stainless WF shapes in combined compression and bending
- Stability Bracing Requirements for Lean-on Systems
- Stability Considerations of Laser Fused Unequal-Leg Angle Stainless Steel Columns
- Stability of stainless steel unequal-leg angles with imperfect supports
- Strength of cold formed steel zed purlins supporting standing seam metal roofing systems under wind uplift
- Testing of CFS double laced built-up columns: Stability and design considerations
- The impact of valency and the orientation of the members on the global stability of lattice steel domes
- Web crippling instability response in CFS built-up open beams: Numerical study and design