Continuing Education

Seismic Design in Steel -- Concepts and Examples (Part 2): Moment Frames (R2)

This 8-part course is intended to provide engineers with guidance on applying the AISC seismic design requirements, correctly and efficiently, on typical projects in regions of moderate or high seismicity.  Parts 1-4 focus on seismic design concepts.  Parts 5-8 go through four distinct parts of a seismic design example for a low-rise building.

Part 2 includes:

  • Presentation of moment frame intended behavior and source of inelastic drift, presentation of moment frame analysis issues
  • Discussion of moment frame connection testing and lessons learned after the Northridge earthquake
  • Treatment of connection design
  • Discussion of member stability

This course is based on a past AISC Live Webinar series and Night School program. 

You must purchase and pass a quiz to receive a PDH certificate for this course.

You can find other parts of this course at the following links:  Part 1: Introduction to Effective Seismic Design;  Part 3: Seismic Design Concepts -- Braced Frames;  Part 4: Seismic Design Concepts -- Buildings;  Part 5: Application -- Design Example Setup;  Part 6: Application -- Building Anlaysis/Diaphragms;  Part 7: Application -- Moment Frames;  Part 8: Application -- Braced Frames.

  • Date: 2/12/2018
  • PDH Credits: 1.5


Rafael Sabelli, SE


Seismic Design in Steel -- Concepts and Examples (Part 2): Moment Frames (R2)


Seismic Design in Steel Part 2 Handout_2 slides per page

Seismic Design in Steel Part 2 Handout_4 slides per page