National Steel Bridge Alliance

In This Section

2016 WSBS Conference Proceedings

Presentation Title Author
Modular Steel Superstructures for Accelerated Bridge Construction - Iowa DOT Case Studies Norm McDonald - Iowa Department of Transportation
Accelerated Steel Solution in the Heart of Iron Country Vincent Gastoni - Parsons,  Kevin Western - Minnesota Department of Transportation
Hot-Dip Galvanized Steel Use in Bridge Construction Tom Langill - American Galvanizers Association
Long-Term Creep Performance of Metallized Faying Surfaces Charles-Darwin Annan - Laval University
Three-Dimensional Finite Element Analysis Software for Steel Bridge Erection and Construction Paul Biju-Duval - University of Texas at Austin
Rail Through-Plate Girder 3-D Analysis for Fundamental Evaluation of Knee Brace Behavior Duncan Paterson - HDR
Challenging Skew: Higgins Road Steel I-Girder Bridge Over I-90 Brandon Chavel - HDR
Kinked Straight Girders Forming Horizontally Curved Alignments on Northeast Anthony Henday Drive
Myles Lewis - Stantec Consulting Ltd.
Case Studies of Complex Girder Erection
Andrew Keaschall, Hossam Abdou - Alfred Benesch and Company
US 84 Mississippi River Bridge - Truss Pin and Link Replacement James Gregg - HNTB
Using Fabrication and Metrology Advances withy Skewed and Curved Pre-Erected Mult Span Pedestrian Bridg Bob Cisneros - High Steel Structures
Fracture Resilience and Redundancy of Built-Up Steel Girders Matt Hebdon - Virginia Tech
Towards and Integrated Fracture Control Plan Ryan Sherman - Purdue University
A Redundant Steel Truss Bridge for the City of Minneapolis Greg Hasbrouck, Martin Furrer - Parsons
The Goethals Bridge Replacement Seth Condell

Advancing the State of Practice in Steel Bridge Evaulation: Application of the Master Curve and Fitness-for-Service for Existing Structures

William Collins - University of Kansas
Strengthening Continuous Steel Girder Bridges with Post-Installed Shear Connectors Kerry Kreitman - University of Texas at Austin
Practical Implementation of Stability Bracing Strength and Stiffness Guidelines for Steel I-Girder Bridges Domenic Coletti - HDR
FDOT's Criteria for Wind on Partially Constructed Bridges Dennis Golabek - Kisinger Campo & Associates, Christina Freeman - Florida Department of Transportation
Reconstructing Chicago's Interchange by the Lake Chris Stine - AECOM
Setting the Stage for Successful Resequencing of a Major River Bridge During Construction Shane Beabes - AECOM
Design-Build of US 69 Bridge Over Missouri River Frank Blakemore - Garver
Success with Steel: The I-25/Paseo del Norte Interchange Reconstruction Flyover Amanda White - New Mexico State University
Bridge Over the Ter River in Girona Spain: Complex Simplicity Juan Sobrino, Javier Jordan - ICCP
Steelwork Solutions with Modern Structural Shapes: European Trends in Steel Fabrication Riccardo Zanon - ArcelorMittal Europe
Scanning, Plating and Heat Straightening, Oh My! Steve Olson - Olson & Nesvold Engineers
Seismic Design of the Kentucky Lake and Lake Barkley Approach Spans Brad Robson, David Rust, Kyle McLemore - Palmer Engineering
Lake Bridges Basket-Handle Network Tied Arch Superstructure Design Jason Stith, Chou-Yu Yong, Terrance Tiberio, Richard Schoedel - Michael Baker International